|
ATCA-736x AdvancedTCA CPU Board with up to
48 GB RAM
ATCA-7367 Block Diagram
ATCA-7368 Block Diagram
|
|
Ultra High-Performance ATCA CPU Board with
Hardware RAID and Solid State Disk
Emerson Network Power's ATCA-7367
and ATCA-7368 AdvancedTCA Blade-CPU's offer
a 2.0 GHz 6-Core Intel Xeon L5638 processor.
The processor is connected
to the Intel 5520 chip set via a 5.86 GT/s Quick Path interface. 4 GB flash and up to
48 GB DDR III 1333 RAM are
available. The boards support Gigabit Ethernet over PICMG 3.0 and 10GbE
over PICMG
3.1. RAID 0/1 is possible via two 2.5" SAS or SSD HDD's. SAS has a high
fail-safe and offers fast and secure connections. That's why it is
qualified for blade server systems. SSD's are robust, have fast access
time and a very low power consumption.
The ATCA-7367 and ATCA-7368 front panel have
up to two GbE ports, two USB 2.0 ports, and one RS232 ports. An
intelligent platform management (IPM) controller monitors all local and
blade specific environmental information.
More interfaces like an USB 2.0 port, two GbE, two SAS and one 2.5" HDD
slot are available via optional transition modules. The RTM-ATCA-7360 offers six GbE ports.
The RTM-ATCA-FC has two 4Gbps Fibre channel interfaces and six GbE ports
instead of the 2.5" HDD slot. The RTM-ATCA-7368 offers an USB 2.0
port, two GbE SFP ports, four SAS interfaces and one 2.5" HDD slot.
Red Hat RHEL
5.5, Wind River PNE LE 3.0,
Wind River PNE LE 4.0, Microsoft
Windows Server 2008, and VMware ESX/ESXi
are supported.
|
|
|
Product Specification
|
|
AdvancedTCA CPU board, single-slot, PICMG 3.0
and PICMG 3.1 compliant, hot swap support
|
|
|
6 core 2.0 GHz Xeon L5638 CPU, 12MB L3 cache
|
|
|
EM64T 64bit technology |
|
|
Quick Path Interface (QPI), 5.86 GT/s
|
|
|
Intel 5020 chip set with SMP support,
Intel ICH10R, Intel 82599, Intel 82576,
LSISAS1064E controller, ATCA-7367 with Intel 82572
|
|
|
Up to
48 GB DDRIII 1333 MHz RAM
|
|
AMC site, mid-size, AMC.1,
AMC.2, AMC.3 compliant
|
|
|
4GB flash,
opt. at the ATCA-7368
|
|
|
Up to two GbE
ports, one RS232 port and two USB 2.0
ports on the front panel
|
|
|
Onboard 80GB HDD
with ext. temp. for versions without AMC
site
|
|
|
Opt. 80GB hot-swappable
HDD on the RTM
with extended temperature range
|
|
|
ATCA-7367 RTM with an USB 2.0 port, two or six GbE ports, two SAS
ports and two 1/2/4 Gbps Fibre channel interfaces on the RTM
|
|
|
ATCA-7368 RTM with an USB 2.0 port, four SAS ports and a RS232
port
|
|
|
4MB firmware flash + 4 MB redundant flash
|
|
|
Opt. 16MB SRAM and 64 MB flash
|
|
|
Opt. onboard 32GB or 64GB SSD
|
|
|
Real time clock and watchdog timer
|
|
|
NEBS and ETSI compliant
|
|
|
IPMI management
|
|
|
Redundant power supply -48 .. -60VDC (39 ..
72VDC)
|
|
|
-5°C .. +55°C operating temperature range
|
|
|
2 years warranty
|
|
|
|
|
Ordering Information
|
 |
|
|
|
ATCA-7367-12GB
|
6 core 2.0 GHz
Xeon L5638 AdvancedTCA processor blade, 3x 4GB RAM, 10GbE, AMC site
|
|
ATCA-7367-12GB-LS
|
6 core 2.0 GHz
Xeon L5638 AdvancedTCA processor blade, 3x 4GB RAM, 10GbE, SATA HDD
|
|
ATCA-7367-24GB
|
6 core 2.0 GHz
Xeon L5638 AdvancedTCA processor blade, 3x 8GB RAM, 10GbE, AMC site
|
|
|
|
ATCA-7368-12GB
|
6 core 2.0 GHz
Xeon L5638 AdvancedTCA processor blade, 3x 4GB RAM, 10GbE, AMC site, no
Flash
|
|
ATCA-7368-12GB-LS
|
6 core 2.0 GHz
Xeon L5638 AdvancedTCA processor blade, 3x 4GB RAM, 10GbE, SATA HDD, no
flash
|
|
ATCA-7368-24GB
|
6 core 2.0 GHz
Xeon L5638 AdvancedTCA processor blade, 3x 8GB RAM, 10GbE, AMC site, no
Flash
|
|
|
|
AMC-FILLER-MS
|
Mid-size
AMC Filler Panel
|
|
|
ATCA-7360-MEM-2G
|
2 GB RAM module for the ATCA-736x series
|
|
|
ATCA-7360-MEM-4G
|
4 GB RAM module for the ATCA-736x series
|
|
|
ATCA-7360-MEM-8G
|
8 GB RAM module for the ATCA-736x series
|
|
|
ATCA-736X-USB1
|
4GB eUSB
for the ATCA-736X series
|
|
|
ATCA7350-HDD1-SAS
|
147 GB SAS HDD for the
RTM-ATCA-7360
|
|
|
ATCA7350-HDD2-SAS
|
300 GB SAS HDD for the
RTM-ATCA-7360
|
|
|
ATCA7350-HDD3-SATA
|
80 GB SATA HDD with extended temperature for the
RTM-ATCA-7360
|
|
|
ATCA7360-MMOD-SATA1
|
32GB onboard SSD for the ATCA-736x series
|
|
|
ATCA7360-MMOD-SATA2
|
64GB onboard SSD for the ATCA-736x series
|
|
|
ATCA7360-SFMMOD
|
R16MB SRAM, 64MB Flash for the ATCA-736x series
|
|
|
ATCA7367-HDD1-SATA
|
80 GB SATA HDD with extended temperature for the
ATCA-7367 and ATCA-7368
|
|
|
RJ45-DSUB-ATCA7140
|
RJ45 DSUB cable for the ATCA-7140, 7150, 7350, 736x
|
|
|
RTM-ATCA-7360
|
RTM for the ATCA-736x series with 6 GbE ports, 2 SAS ports,
and one HDD slot
|
|
|
RTM-ATCA-7360-FC
|
RTM for the ATCA-736x series with 6 GbE ports, 2 SAS ports,
and 2 Fibre channel interfaces
|
|
|
RTM-ATCA-7360-HDDKIT
|
Mountingkit for HDD/SSD with RTM-ATCA-7360 and RTM-ATCA-7360-L
|
|
|
RTM-ATCA-7360-L
|
RTM for the ATCA-736x series with 2 GbE ports, 2 SAS ports,
and one HDD slot
|
|
|
RTM-ATCA-7368
|
RTM for
the ATCA-7368 with 2 GbE
(SFP) Ports, 4 SAS Ports, 1 USB, 1 RS232 and one HDD
|
|
|
RTM-ATCA-736X-DD-300
|
RTM for
the ATCA-7367 with 2 GbE Ports, 2x 147 GB 2.5" SAS HDDs
|
|
|
RTM-ATCA-736X-DD-600
|
RTM for
the ATCA-7367 with 2 GbE Ports, 2x 300 GB 2.5" SAS HDDs
|
|
|
RTM-ATCA-736X-DD-1K2
|
RTM for
the ATCA-7367 with 2 GbE Ports, 2x 600 GB 2.5" SAS HDDs
|
|
|
SA-BBS-WR30-7367
|
CD BBS SW and WindRiver PNE
4.0 for ATCA-7367
|
|
|
SA-BBS-WR30-7368
|
CD BBS SW and WindRiver PNE
4.0 for ATCA-7368
|
|
|
|
ATCA-7367-DOC |
ATCA-7367 Reference Guide |
|
|
ATCA-7368-DOC |
ATCA-7368 Reference Guide |
|
|
