|
ATCA-736x AdvancedTCA CPU Board with up to
96 GB RAM
ATCA-7360 Block Diagram
ATCA-7365 Block Diagram
|
|
Ultra High-Performance ATCA CPU Board with
Hardware RAID and Solid State Disk
Emerson Network Power's ATCA-7360
and ATCA-7365 AdvancedTCA Blade-CPU's offer
two 6-Core or 4-Core Intel Xeon processors in a symmetric multiprocessing (SMP) configuration.
Both processors have a clock rate up to 2.4 GHz and each is connected
to the Intel 5520 chip set via a 5.86 GT/s Quick Path interface. 4 GB flash and up to
96 GB DDR III ECC RAM are
available. The boards support Gigabit Ethernet over PICMG 3.0 and 10GbE
over PICMG
3.1. RAID 0/1 is possible via two 2.5" SAS or SSD HDD's. SAS has a high
fail-safe and offers fast and secure connections. That's why it is
qualified for blade server systems. SSD's are robust, have fast access
time and a very low power consumption.
The ATCA-7360 and ATCA-7365 front panel have two USB 2.0 ports, one RS232 ports, one GbE port
and an opt. VGA port. An
intelligent platform management (IPM) controller monitors all local and
blade specific environmental information.
More interfaces like an USB 2.0 port, two GbE, two SAS and one 2.5" HDD
slot are available via optional transition modules. The RTM-ATCA-7360 offers six GbE ports.
The RTM-ATCA-FC has two 4Gbps Fibre channel interfaces and six GbE ports
instead of the 2.5" HDD slot.
Red Hat RHEL
5.5, Wind River PNE LE 3.0, Microsoft Windows Server 2003, Microsoft
Windows Server 2008, and VMware ESX/ESXi
are supported.
|
|
|
Product Specification
|
|
AdvancedTCA CPU board, single-slot, PICMG 3.0
and PICMG 3.1 compliant, hot swap support
|
|
|
Two 6 core 2.4 GHz Xeon E5645 CPUs,12MB L3 cache per CPU
two 6 core 2.0 GHz Xeon L5638 CPUs,12MB L3 cache per CPU
two 4 core 2.4 GHz Xeon E5620 CPUs,12MB L3 cache per CPU
two 4 core 2.13 GHz Xeon L5518 CPUs,8MB L3 cache per CPU
|
|
|
EM64T 64bit technology |
|
|
Quick Path Interface (QPI), 5.86 GT/s
|
|
|
Intel® 5020 chip set with SMP support,
Intel® ICH10R, Intel® 82572, Intel® 82599, Intel® 82576,
LSISAS1064E Controller
|
|
|
Up to
96 GB DDRIII 1066/1333 MHz RAM
|
|
|
4GB flash
|
|
|
One GbE port, one RS232 port, and two USB 2.0
front panel ports, opt. one VGA port
|
|
|
80GB hot-swappable HDD on the RTM
with extended temperature range
|
|
|
One USB 2.0 port, two or six GbE ports, two
SAS ports and two 1/2/4 Gb/s Fibre channel interfaces on the RTM
|
|
4MB firmware flash + 4 MB redundant flash
|
|
|
Opt. 16MB SRAM and 64 MB flash
|
|
|
Opt. onboard 32GB or 64GB SSD
|
|
|
Real time clock and watchdog timer
|
|
|
NEBS and ETSI compliant
|
|
|
IPMI management
|
|
|
Redundant power supply -48 .. -60VDC (39 ..
57/72VDC)
|
|
|
In 2 environmental classes available:
-5°C .. +55°C and +5°C .. +35°C |
|
|
2 years warranty
|
|
|
|
|
Ordering Information
|
 |
|
|
|
ATCA-7360-12GB
|
Dual Xeon L5518 Quad Core 2.13 GHz AdvancedTCA Processor Blade,
6x 2GB RAM, 10GbE, -5°C .. +55°C
|
|
ATCA-7360-24GB
|
Dual Xeon L5518 Quad Core 2.13 GHz AdvancedTCA Processor Blade,
6x 4GB RAM, 10GbE, -5°C .. +55°C
|
|
ATCA-7360-48GB
|
Dual Xeon L5518 Quad Core 2.13 GHz AdvancedTCA Processor Blade,
6x 8GB RAM, 10GbE, -5°C .. +55°C
|
|
|
|
ATCA-7365-D-24GB-V
|
Dual Xeon L5638 6-Core 2.0 GHz AdvancedTCA Processor Blade,
6x 4GB RAM, 10GbE, VGA, -5°C .. +55°C
|
|
ATCA-7365-D-48GB-V
|
Dual Xeon L5638 6-Core 2.0 GHz AdvancedTCA Processor Blade,
6x 8GB RAM, 10GbE, VGA, -5°C .. +55°C
|
|
|
|
ATCA-7365-24GB-CE
|
Dual Xeon E5645 6-Core 2.4 GHz AdvancedTCA Processor Blade,
6x 4GB RAM, 10GbE, +5°C .. +35°C
|
|
ATCA-7365-24GB-L-CE
|
Dual Xeon E5620 Quad Core 2.4 GHz AdvancedTCA Processor Blade,
6x 4GB RAM, 10GbE, +5°C .. +35°C
|
|
ATCA-7365-24GB-V-CE
|
Dual Xeon E5645 6-Core 2.4 GHz AdvancedTCA Processor Blade,
6x 4GB RAM, 10GbE, VGA, +5°C .. +35°C
|
|
|
|
ATCA-7360-MEM-2G
|
2 GB RAM module for the ATCA-736x series
|
|
|
ATCA-7360-MEM-4G
|
4 GB RAM module for the ATCA-736x series
|
|
|
ATCA-7360-MEM-8G
|
8 GB RAM module for the ATCA-736x series
|
|
|
ATCA7360-HDD1-SAS
|
147 GB SAS HDD for
RTM-ATCA-7360
|
|
|
ATCA7360-HDD2-SAS
|
300 GB SAS HDD for
RTM-ATCA-7360
|
|
|
ATCA7360-HDD3-SATA
|
80 GB SATA HDD with extended temperature for
RTM-ATCA-7360
|
|
|
ATCA7360-MMOD-SATA1
|
32GB onboard SSD for the ATCA-736x series
|
|
|
ATCA7360-MMOD-SATA2
|
64GB onboard SSD for the ATCA-736x series
|
|
|
ATCA7360-SFMMOD
|
R16MB SRAM, 64MB Flash for the ATCA-736x series
|
|
|
RJ45-DSUB-ATCA7140
|
RJ45 DSUB cable for the ATCA-7140, 7150, 7350, 736x
|
|
|
RTM-ATCA-7360
|
RTM for the ATCA-736x series with 6 GbE ports, 2 SAS ports,
and one HDD slot
|
|
|
RTM-ATCA-7360-FC
|
RTM for the ATCA-736x series with 6 GbE ports, 2 SAS ports,
and 2 Fibre channel interfaces
|
|
|
RTM-ATCA-7360-HDDKIT
|
Mountingkit for HDD/SSD with RTM-ATCA-7360 and RTM-ATCA-7360-L
|
|
|
RTM-ATCA-7360-L
|
RTM for the ATCA-736x series with 2 GbE ports, 2 SAS ports,
and one HDD slot
|
|
|
RTM-ATCA-736X-DD-300
|
RTM for
the ATCA-736x series with 2 GbE Ports, 2x 147 GB 2.5" SAS HDDs
|
|
|
RTM-ATCA-736X-DD-600
|
RTM for
the ATCA-736x series with 2 GbE Ports, 2x 300 GB 2.5" SAS HDDs
|
|
|
RTM-ATCA-736X-DD-1K2
|
RTM for
the ATCA-736x series with 2 GbE Ports, 2x 600 GB 2.5" SAS HDDs
|
|
|
SA-BBS-WR30-7360
|
CD BBS SW and WindRiver PNE 3.0 for ATCA-7360 and
ATCA-7365
|
|
|
|
ATCA-7360-DOC |
ATCA-7360 Reference Guide |
|
|
ATCA-7365-DOC |
ATCA-7365 Reference Guide |
|
|
