|

ComEth4050a_3U Switch with
up to 37 Mpps

ComEth4050a_3U Block Diagram |
|
Gigabit Ethernet Switch for up to 16000 MAC
addresses Management
Interface Concept's ComEth4050a_3U series is a 3U CompactPCI Gigabit Ethernet Layer 2/3 switch with full- and half duplex mode.
10 GbE ports are available via J2. Two GbE ports are on the
front panel or on a rear transition module. The front panel ports have a
RJ45 or LC interface and they are PICMG 2.16 compliant. On the front
panel shows one LED per port the activity and link of the Ethernet
connections.
The ComEth4050a_3U series supports auto crossover,
auto polarity and auto
negotiation. Auto negotiation is defined in IEEE 802.3u. The QoS allows
to prevent packet loss with back pressure or flow control. A virtual cable tester checks the cable.
VLAN's based on port or MAC addresses simplifies network management and
the RSTP/STP protocol is used for a more reliable network.
IGMP and MLD reduce the network traffic. 9 KB jumbo
frames minimize the interrupt handling of the involved stations and
generate a smaller protocol overhead. Link aggregation and LACP increase
the data throughput.
In addition the
ComEth4050a_3U series combines a layer 2 switch and a layer 3 router. The
switch can handles up to 16000 MAC addresses and offers layer 3 functions
allowing local IP forwarding (IPv4/IPv6), static and dynamic protocols
(RIPv2, OSPFv2) routing, proxy-ARP and DHCP. The functions are
manageable through web or CLI.
The ComEth4050a_3U series comes in three different
environment classes from standard (0°C to 55°C), extended temperature
(-20°C to +65°C up to
conduction-cooled (-40°C to +75°C).
|
|
|
Product Specification
|
|
3U CompactPCI switch, PICMG
2.16 compatible, IEEE 802.1ad, 802.1d, 802.1p, 802.1Q, 802.1v,
802.1w, 802.1x
compliant
|
|
10 ports layer 2/ 3 Gigabit Ethernet switch
|
|
Up to 10 GbE ports on J2 |
|
2 GbE ports on the front panel, RJ45 or LC
connector |
|
MAC table with 16.000 entries |
|
Back pressure and flow control
|
|
9 KB frames |
|
IPv4 IGMP and IPv6 MLD snooping |
|
Static link aggregation or LACP |
|
Layer 3 functions: static and dynamic
protocols (RIPv2, OSPFv2), IPv4/IPv6, proxy-ARP, DHCP
|
|
Bandwidth management with flow rate limiting,
egress rate shaping with rate ranging port from 64k to
1Gbs and minimal bandwidth per traffic class |
|
Up to 400 VLANs (256 active) |
|
QoS with 8 priority queues level per port |
|
Multicast and Broadcast limiting |
|
IGMP, UDP, and RSTP/STP protocol |
|
Virtual Marvell cable tester
|
|
Port mirroring
|
|
SNMP and private MIBs (Management Information
Base) |
|
Managed through web or a CLI interface
|
|
Full and half duplex mode |
|
Auto negation, auto polarity, auto crossover
and automatic MAC address management
|
|
One LED per port on the front panel for link and activity and two LEDs
for board status
|
|
Full MIB and RMON counters
|
|
Operating temperature range: 0°C .. 55°C, -20°C .. +65°C
or conduction-cooled (-40°C .. +75°C)
|
|
2 years warranty
|
|
|
|
|
Ordering Information
|
|

|
|

|
ComEth4050a_3U-740
|
10 port Gigabit Ethernet Switch, 0°C .. +55°C
operating temperature range
|
|
ComEth4050a_3U-760
|
10 port Gigabit Ethernet Switch, -20°C ..
+65°C operating temperature range
|
|
ComEth4050a_3U-785
|
10 port Gigabit Ethernet Switch, conduction-cooled
|
|

|
|