TCP630  Reconfigurable Xilinx XC2S300E-6 Spartan-IIE FPGA module with max. 600,000 system gates, 64 TTL or 32 differential I/Os

TCP631  Reconfigurable Xilinx XC3S1500-6 Spartan-III or Xilinx XC3S5000-6 Spartan-III FPGA module with max. 5,000,000 system gates, 64 front and 64 rear TTL I/Os

cPCI-7841  Two channel CAN bus interface conforming to CAN specification 2.0B, channels isolated from each other, Philips SJA1000 controller

TCP630  Reconfigurable Xilinx XC2S300E-6 Spartan-IIE FPGA CPCI module with max. 600.000 system gates, 64 TTL or 32 differential I/Os

TCP631  Reconfigurable Xilinx XC3S1500-6 Spartan-III or Xilinx XC3S5000-6 Spartan-III FPGA module with max. 5,000,000 system gates, 64 front and 64 rear TTL I/Os

cPCI-8217  3U graphic controller with Silicon Motion Lynx3DM SM721 VGA graphic chipset with 4MB VRAM, resolution up to 1280 x 1024, 24-bit colour, DB15 front face plate, driver supporting for Windows 95/ 98/ ME/ NT/ 2000/ XP, and Linux

cRTV-24  3U 4 channel video frame grabber board, 64-bit/66MHz CompactPCI interface, signal type: PAL/NTSC colour, CCIR/EIA monochrome, image sampling speed up to 120 fps, programmable resolution and scaling

TCP211  3U carrier board for 2 IndustryPack modules, I/O access via 50 pin 0.1 inch ribbon cable connector per IP mounted in front panel, self healing fuses and RF filters on all IP power lines, PICMG 2.0 and PCI 2.2 compliant, 3.3/5V Vio

TCP212  3U carrier board for 2 IndustryPack modules, I/O access via 50 pin champ connector per IP, front panel I/O, self healing fuses and RF filters on all IP power lines, PICMG 2.0 and PCI 2.2 compliant, 3.3/5V Vio

TCP213  3U carrier board for 2 IndustryPack modules, I/O access via J2 PICMG 2.4 Rev. 1.0, self healing fuses and RF filters on all IP power lines, PICMG 2.0 and PCI 2.2 compliant, 3.3/5V Vio

TCP872  3U carrier board with 2 PC Card/CardBus slots for cards of Type I, and II, or one card of Type III, 32-bit CompactPCI interface

cPCI-8301  3U 64-bit/66 MHz carrier board for one PMC module with front panel I/O for standard CompactPCI system, only mechanical adapter w.o. active components, 3.3/5V Vio

TCP270  3U carrier board for a PMC module with front panel I/O for standard CompactPCI systems, opt. P2 I/O, 3.3/5V Vio

TCP863  3U 4 port serial I/O controller, individually programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36, or X.21, max. baud rate 10 MBd syn. and 2 MBd asyn., EIA-232 max. 115.2 KBd, FPGA controller, DMA support

TCP866  3U 8 port RS232/RS422 serial I/O controller, 64 byte Rx/Tx FIFOs per channel with programmable threshold, programmable data rate max. 921.6 KBd, 2 ST16C654 serial controller, PCI9030 bridge