|
ComEth4050a Switch with 20 P0 Ports and 4 RJ45 or LC Ports
ComEth4050a Block Diagram |
|
Gigabit Ethernet Switch 4 RJ45 or LC Ports and up to 37 Mpps
Interface Concept's ComEth4050a series is a 6U CompactPCI Gigabit Ethernet Layer 2/3 switch with full- and half duplex mode.
20 GbE ports are available via P0. In addition 4 GbE ports are on the
front panel or on a rear transition module. The front panel ports have a
RJ45 or LC interface and they are PICMG 2.16 compliant. On the front
panel shows one LED per port the activity and link of the Ethernet
connections.
The ComEth4050a series supports auto crossover,
auto polarity and auto
negotiation. Auto negotiation is defined in IEEE 802.3u. The QoS allows
to prevent packet loss with back pressure or flow control. A virtual cable tester checks the cable.
VLAN's based on port or MAC addresses simplifies network management and
the RSTP/STP protocol is used for a more reliable network.
IGMP and MLD reduce the network traffic. 9 KB jumbo
frames minimize the interrupt handling of the involved stations and
generate a smaller protocol overhead. Link aggregation and LACP increase
the data throughput.
In addition the
ComEth4050a series combines a layer 2 switch and a layer 3 router. The
switch can handles up to 16000 MAC addresses and offers layer 3 functions
allowing local IP forwarding (IPv4/IPv6), static and dynamic protocols
(RIPv2, OSPFv2) routing, proxy-ARP and DHCP. The functions are
manageable through web or CLI.
The ComEth4050a series comes in four different
environment classes from standard (0°C to 55°C), extended temperature
(-20°C to +65°C), rugged convection-cooled (-40°C to +75°C) up to
conduction-cooled (-40°C to +75°C).
|
|
|
Product Specification
|
|
6U/4HP CompactPCI switch, PICMG
2.16 compatible, IEEE 802.1ad, 802.1d, 802.1p, 802.1Q, 802.1v,
802.1w, 802.1x
compliant
|
|
|
24 port layer 2/ 3 Gigabit Ethernet switch
|
|
|
Up to 20 GbE ports on P0 |
|
|
4 GbE ports on the front panel, RJ45 or LC
connector |
|
|
MAC table with 16.000 entries |
|
|
Back pressure and flow control
|
|
|
9 KB frames |
|
|
IPv4 IGMP and IPv6 MLD snooping |
|
|
Static link aggregation or LACP |
|
|
Layer 3 functions: static and dynamic
protocols (RIPv2, OSPFv2), IPv4/IPv6, proxy-ARP, DHCP
|
|
|
Bandwidth management with flow rate limiting,
egress rate shaping with rate ranging port from 64k to
1Gbs and minimal bandwidth per traffic class |
|
|
Up to 4000 VLANs (256 active) |
|
|
QoS with 8 priority queues level per port |
|
|
Multicast and Broadcast limiting |
|
|
IGMP, UDP, and RSTP/STP protocol |
|
|
Virtual Marvell cable tester
|
|
|
Port mirroring
|
|
|
SNMP and private MIBs (Management Information
Base) |
|
|
Managed through web or a CLI interface
|
|
|
Full and half duplex mode |
|
|
Auto negation, auto polarity, auto crossover
and automatic MAC address management
|
|
|
One LED per port on the front panel for link and activity and two LEDs
for board status
|
|
|
Full MIB and RMON counters
|
|
|
Operating temperature range: 0°C .. 55°C, -20°C .. +65°C, -40°C .. +75°C
or conduction-cooled
|
|
|
2 years warranty
|
|
|
|
|
Ordering Information
|
|
|
|
|
ComEth4050a-110
|
24 port GbE layer2/3 Switch, 0°C .. 55°C
operating temperature range |
|
ComEth4050a-111
|
24 port GbE layer2/3 Switch, -20°C .. +65°C operating
temperature range |
|
ComEth4050a-112
|
24 port GbE layer2/3 Switch, -40°C .. +75°C operating
temperature range |
|
ComEth4050a-113
|
24 port GbE layer2/3 Switch, conduction-cooled |
|
|
|
