|
|
||
 |
TIP500 16 single-ended or 8 differential 12 bit ADC channels, 12.5 µs conversion time, isolated, gain 1, 2, 5,10 or 1, 2, 4, 8, +/-10V or 0-10V input voltage range, pinning as TIP850 |
|
|
|
||
 |
TIP570 16 channel 12 bit ADC, isolated, 12.5 µs conversion time, single-ended or differential inputs, gain 1, 2, 5, 10, ±10V input voltage range, 8 channel 12 bit DAC, isolated, ±10V output voltage range |
|
|
|
||
 |
TIP830 8 channel 12 or 16 bit synchronous ADC, ±10V input voltage range, 25 µs conversion time, factory calibration, trigger I/O pins allow simultaneous sampling of several modules |
|
|
|
||
 |
TIP840 8/16 channel 12 bit ADC, 10 µs conversion time, single-ended or differential mode, ±10V input voltage range, gain 1, 10, 100, or 1, 2, 4, 8, factory calibration |
|
|
|
||
 |
TIP845 48 channel 14 bit ADC, 2.5 µs conversion time, single-ended or differential inputs, ±10V input voltage range, gain 1, 2, 4, 8, sequence timer, factory calibration |
|
|
|
||
 |
TIP850 16 channel 12 bit ADC, 10 µs conversion time, single-ended or differential inputs, ±10V input voltage range, gain 1, 10, 100, or 1, 2, 4, 8, 4 channel 12 bit DAC, ±10V output range, factory calibrated |
|
|
|
||
|
|
||
|
|
||
 |
TIP550 4 or 8 channel 12 bit DAC, 13 µs, galvanically isolated, DC/DC converter, programmable output voltage range is 0..10V or ±10V selectable by jumper |
|
|
|
||
|
TIP570 16 channel 12 bit ADC, galvanically isolated, 16 single-ended or 8 differential inputs, progr. gain amplifier supports gains of 1, 2, 5, 10, full-scale input range ±10V, 8 channel 12 bit DAC, galvanically isolated, ±10V output voltage |
|
|
|
||
|
TIP850 16 channel 12 bit ADC, 10 µs, 16 single-ended or 8 differential inputs, full-scale input range ±10V, progr. gain amplifier (gain = 1, 10, 100, or 1, 2, 4, 8), 4 channel 12 bit DAC, ±10V, factory calibrated |
|
|
|
||
|
|
||
|
|
||
|
TIP501 16 channel 16 bit ADC, 12..14.5 µs, galvanically isolated, DC/DC converter, 16 single-ended or 8 differential inputs, progr. gain amplifier, gain = 1, 2, 5, 10, or 1, 2, 4, 8, full-scale input range 0..10V or ±10V |
|
|
|
||
|
TIP830 8 channel 12 or 16 bit ADC, synchronous, single-ended, full-scale input range ±10 V, 25 µs for sampling and conversion, factory calibrated, trigger I/O pin allows simultaneous sampling of several modules |
|
|
|
||
|
|
||
|
|
||
 |
TIP551 4 channel 16 bit DAC, galvanically isolated, DC/DC converter, setting to 0.003% in typ. 10 µs, progr. output range 0..10V or ±10V, factory calibrated |
|
|
|
||
|
|
||
|
|
||
|
|
||
 |
TIP302 Universal communication controller, Motorola MC68302 25 MHz CPU, 3 channels, sync. and asyn. transfer, 1MB SRAM, 256KB FLASH, protocols: UART, HDLC, SDLC, Bisync, DDCMP,V.110, ISDN (2B+D) |
|
|
|
||
 |
TIP360 Universal communication controller, 25 MHz Motorola MC68360 CPU, 4 ports, 2 MB DRAM, 256 KB FLASH, protocols: BISYNC, HDLC, SDLC, UART, DDCMP, AppleTalk, Signaling System #7, Profibus, ATM, V.14, X.21, ISDN and transparent mode |
|
|
|
||
|
|
||
|
Digital
I/O,
12..60V, optically isolated |
||
|
|
||
 |
TIP600 16 individually isolated 24V inputs with programmable debounce circuit and programmable interrupts, 0°C to +70°C operating temperature range |
|
|
|
||
 |
TIP605 16 individually isolated 24V inputs with programmable debounce circuit and programmable interrupts, -40°C to +85°C operating temperature range |
|
|
|
||
 |
TIP606 16 individual optically isolated differential inputs with high noise immunity, max. 44V signal voltage, programmable electronic debounce circuit and programmable interrupts |
|
|
|
||
 |
TIP670 8 digital 24V inputs galvanically isolated, programmable interrupts, digital debouncing, eight 24V/0.5A outputs, in groups of two isolated inputs and outputs, overload and short-circuit protection, high or low-side switching |
|
|
|
||
 |
TIP700 8/16 digital 24V/0.5A outputs galvanically isolated, outputs isolated against each other in groups of two, protected against thermal overload and short-circuit, high or low-side switches, watchdog timer resets all channels on triggering failure |
|
|
|
||
 |
TIP710 16 digital 6..48V/1A outputs configured as high-side switch, galvanically isolated, protected against thermal overload and short-circuit, watchdog timer resets all channels on triggering failure |
|
|
|
||
|
|
||
|
|
||
|
|
||
 |
TIP672 24-bit I/O module with differential RS-422 I/O lines, each line can be individually configured as input or output, ESD protected, programmable interrupts, resistor arrays for termination of the I/O lines in sockets |
|
|
|
||
|
|
||
|
Counter/Timer, FPGA,
Digital
I/O, TTL I/O |
||
|
|
||
 |
TIP610 20 bit digital TTL I/O module based on Zilog's Z8536 CIO counter/timer and parallel I/O device, two 8 bit I/O ports and a 4 bit I/O or control port |
|
|
|
||
 |
TIP620 Emulation of two Motorola MC68230 programmable interface/timer with 48 bit TTL I/O lines, ESD and overvoltage protection |
|
|
|
||
 |
TIP630 User programmable FPGA module with 48 bit TTL I/O, Xilinx XC2S200-5 with 200.000 gates, configuration via IP bus or PROM, programmable clock from 250 KHz to 166 MHz, pull-up resistor networks at 3.3V or 5V |
|
|
|
||
|
TIP675 48 bit digital TTL I/O module with tri-state I/O lines, I/Os individually programmable as input or output, full interrupt capability on inputs, interrupt edges/levels programmable, simultaneous update or synchronized by external clock |
|
|
|
||
 |
TIP810 Basic CAN-Controller, optically isolated interface, CAN High-Speed (ISO 11898) or EIA-485 modified |
|
 |
TIP811 Interbus Master interface, 68332 CPU and Phoenix Interbus firmware, supports up to 128 I/O modules and up to 2048 I/O points, compliant to Phoenix Contact's IBS-VME board (3rd Generation) |
|
 |
TIP812 SERCOS® bus interface, SERCON410 controller, EIA-485 and fibre ring interface, 2 encoder interfaces to support hand wheel functionality, available with optically isolated physical interface |
|
 |
TIP813 LON bus interface, Neuron chip 3150, 4KB dual-ported RAM, 32KB EPROM for protocol firmware and application program, MIP/DPR license included, EIA-485, transformer coupled interface, FTT-10A or Power Line interface |
|
 |
TIP815 ARCNET interface, COM20020 ARCNET Controller 2.5 or 5Mbit/s, traditional hybrid or isolated RS485 interface |
|
 |
TIP816 Extended CAN controller, optically isolated interface, supports CAN specifications 2.0 part A and B, CAN High Speed (ISO 11898) or EIA-485 modified |
|
|
TIP818 Fault tolerant CAN controller, optically isolated physical interface, supports CAN specifications 2.0 part A and B, Philips TJA1053 CAN transceiver |
|
 |
TIP903 3 port extended CAN interface, 3 Intel 82527 controllers, frame acc. CAN specifications 2.0 part A and B, CAN High Speed Interface (ISO 11898) |
|
|
|
||
 |
S0-IP IP modules with ISDN S0 interface, 2 B-channels, 32Byte transmit and receive buffer per channel, ITU-TI.430 compliant, ISDN software for VxWorks and pSOS+, B-, and D-channel protocols, ISDN S/T interface option |
|
|
|
||
 |
TIP102 2 channel motion controller with incremental encoder, 24 bit up/down counter up to 1.2 MHz, 16 bit D/A converter per axis with +/-10V output signal, 12 bit A/D converter per axis with adjustable input voltage range, 4 isolated 24V inputs, 3 isolated 24V outputs |
|
 |
TIP111 2 channel servo controller with absolute serial encoder interface, high precision position controller, synchronous serial interface (SSI), programmable word length up to 32 bit, 16 bit DAC, 12 bit ADC, 4 isolated 24V inputs, and 3 isolated 24V outputs |
|
 |
TIP114 10 channel absolute encoder interface with isolated serial SSI inputs and a 32 bit shift register, EIA-422 encoder inputs and clock outputs, galvanically isolated, 1..15 µs SSI clock |
|
 |
TIP115 5 channel SSI interface controller with 'listen-only' mode, all channels independent, 1..32 bit shift register, EIA-422 encoder inputs and clock outputs, data inputs are galvanically isolated, binary or Gray code, 1..15 µs SSI clock |
|
 |
TIP116 4 channel quadrature/general purpose counter, 32 bit counter, 32 bit preload and compare register, 4 operating modes, DC .. 4 MHz input frequency, inputs TTL/RS422 compatible |
|
 |
TIP119 6 channel 16 bit quadrature counter, 1.3 MHz tracking rate, vectored interrupt, RS422- und RS423-inputs |
|
 |
TIP120 2 channel incremental servo controller with LM628/629, 12 bit DAC, 32 bit position, velocity, and acceleration registers, three 24V inputs per axis for limit switches, one 24V output per axis for enable signal, galvanically isolated |
|
 |
TIP150 2 channel tracking synchro/resolver-to-digital converter, converter accuracy: 2 or 4 arcmin ±1 LSB, programmable resolution 10, 12, 14, or 16 bit, adjustable bandwidth |
|
|
|
||
|
|
||
|
TIP302 Universal communication controller, 25 MHz Motorola MC68302 CPU, 3 ports, sync. and asyn. transmission, 1 MB SRAM, 256 KB FLASH, protocols: UART, HDLC, SDLC, bisync, DDCMP, V.110, ISDN (2B+D) |
|
|
|
||
|
|
TIP360 Universal communication controller, 25 MHz Motorola MC68360 CPU, 4 ports, 2 MB DRAM, 256 KB FLASH, protocols: BISYNC, HDLC, SDLC, UART, DDCMP, AppleTalk, Signaling System #7, Profibus, ATM, V.14, X.21, ISDN and transparent mode |
|
|
|
||
 |
TIP865 4 port serial controller, EIA-232/422/485 or TTL interface, Zilog Z85C30 controller, asyn. and sync. transmission up to 2 Mbps, full modem control |
|
|
|
||
 |
TIP866 8 port high performance serial interface, EIA-232/422/TTL, ST16C654 controller, data rates up to 460.8 KBd, 64 byte FIFOs, full modem control, 15 KV ESD protection |
|
|
|
||
 |
TIP867 8 port high performance serial EIA-485 interface, Zilog Z85230 controller, programmable data rates up to 2 MBd, 8 byte FIFO for each TX channel and 4-byte FIFO for each RX channel, 15 KV ESD protection |
|
|
|
||
|
|
||
|
|
||
|
|
||
 |
TIP250 8 MB Flash memory module, organization 2 x 4MBx16-bit, min. 1.000.000 writing cycles, |
|
|
|
||
 |
TIP255 2 MB battery buffered SRAM, organization 2 x 1MB x 16-bit, Li-battery for typically 8 years data protection, interrupt on battery low |
|
|
|
|
|
|
|
||
|
|
||
|
TIP150 2 channel tracking synchro/resolver-to-digital converter, converter accuracy: 2 or 4 arcmin ±1 LSB, programmable resolution 10, 12, 14, or 16 bit, adjustable bandwidth |
|
