|
4539 Quad E1/T1/J1
Controller
4539 Block Diagram
|
|
Quad E1/T1/J1 Interface with
Rear
Access based on the Field-Proven Most Advanced I/O Architecture
in the Industry
The iSPAN 4539 PMC T1/E1/J1 communications controller from
Interphase provides a powerful best-in-class communications I/O solution
for 1.544 Mbps / 2.048 Mbps connectivity. This feature-rich solution
features one of the most advanced communications processors available,
offloading the host processor. As part of the MPC8264-based product
family from Interphase, development efforts on the 4539 can be leveraged
on sister products for future development projects that may require
different interfaces, form factors, feature-sets, or O/S environments.
The iSPAN 4539 provides on a single PMC module four E1/T1/J1 interfaces
with rear I/O, one Fast Ethernet port on front panel, a 300 MHz MPC8264
PowerQUICC II™ CPU with 64 MB DRAM und 4 MB Flash as well as a TDM bus
interface. The four line interfaces are build with an Infineon® QuadFALC™ Framer chip. The line interfaces can be configured via
software as E1, T1, or J1. The E1 ports are available via P14. The P13
and P14 connectors layout accords to the PTMC (PICMG® 2.15)
configuration 1 specification.
The module can handle ATM Inverse multiplexing (IMA)
and allows the trunking of up to four ports.
An extended board development kit is included in
delivery. An optional board support package for Wind Rivers VxWorks 5.4
provides on-board ATM AAL0, AAL2, and AAL5 protocol support.
|
|
|
Product Specification
|
|
PMC module, 32bit/33MHz
PCI interface, IEEE P1386., PCI 2.2, and PTMC compliant
|
|
|
Four E1, T1, or J1 Ports (software
configurable)
|
|
|
Transition module with 4 or 8 E1/T1/J1 ports
(RJ45)
|
|
|
Mirroring (port snooping) of E1 ports (port
1 to port 2, port 3 to port 4) possible
|
|
|
10/100BaseTX Fast Ethernet port (RJ-45) on front panel
|
|
|
TTY debugging port on front panel
|
|
|
Optional JTAG port
|
|
|
300 MHz Motorola MPC8264 PowerQUICC II™ processor
|
|
|
64 MB shared SDRAM
|
|
|
4 MB Flash
|
|
|
Opt. 4 K x 64 bit content addressable memory
(CAM)
|
|
|
Integrated CSU at T1 mode
|
|
|
Optional ATM inverse multiplexing (IMA)
|
|
|
VxWorks™ BSP available
|
|
|
SDK included in delivery
|
|
|
Power dissipation max. 8.1W @ 3.3V
|
|
|
0°C .. 55°C operating temperature range
|
|
|
1 year warranty
|
|
|
|
|
Ordering Information
|
 |
|
|
4539-010
|
Quad E1/T1/J1 controller, incl. BDK
|
|
4539-011
|
Quad E1/T1/J1 controller, incl. BDK, JTAG port
|
|
|
|
6435-009 |
4 port transition module (J5) with keys |
|
|
6435-010 |
8 port transition module (J5) with keys |
|
|
6435-011 |
4 port transition module (J5) without keys |
|
|
6435-012 |
8 port transition module (J5) without keys |
|
|
6435-013 |
8 port transition module (J3) with keys |
|
|
3039-000 |
4 port PIM for 4539, unshielded |
|
|
3039-001 |
4-Port PIM for 4539, shielded |
|
|
75 Ohm versions of the transition modules are available on request |
|
|
|
4539-903
|
4539 BSP for VxWorks™ 5.3, 5.4 Release 1.1
|
|
|
|
Product Overview of iWARE Development Kits |
|
|
|
|
4539-90x-SS70
|
SS7 MTP1&2 low speed links
|
|
4539-90x-SS7H
|
SS7 MTP1&2 high speed links
|
|
|
4539-90x-AAL2
|
ATM AAL2 protocol package (voice)
|
|
4539-90x-AAL5
|
ATM AAL5 protocol package (data)
|
|
|
4539-90x-FR00 |
Frame relay protocol package |
|
|
4539-90x-QSAL |
Q.SAAL protocol package incl. SCCOP, SSCF, and ATM
AAL5 |
|
|
4539-90x-HDLC |
HDLC protocol package |
|
|
|
4539-TPB
|
4539 Technical Product Brief
|
|
|
|
UG4539-000-B
|
5539F/4539 T1/E1/J1 Communications Controller Board Installation and
Maintenance Manual (1) |
|
|
UG4539-001-B |
5539F/4539 T1/E1/J1 Communications Controller Hardware Reference Manual (1)
|
|
|
UG4539-004-B |
5539F/4539 T1/E1/J1 Communications Controller BIST and Monitor Manual (1) |
|
|
