|
TPMC375
8 Channel RS-232/422/485 Serial Interface with Conduction Cooling
TPMC376 4 Channel RS-232/422/485 Serial Interface with
Conduction Cooling
TPMC375 Block Diagram
TPMC376 Block Diagram
TPIM001-10 PIM I/O Module with HD50 Connector
|
|
Conduction Cooled Programmable Serial Interfaces
with High-Impedance-State after Power-up
The TPMC375 and TPMC376 are single-width 32 bit PMC modules with
conduction cooling
and offer 4 or 8 channel high performance
serial controllers with individually programmable RS232, RS422, and
RS485 interfaces. The modules are designed for the use on carrier
boards with stiffener bars and have an operating temperature range of
-40°C to +85°C.
RS232 channels support RxD, TxD, RTS, and CTS,
and RS422 channels support RxD+/- and TxD+/-.
RS485 channels can operate in 4-wire full duplex or 2-wire half duplex
mode. The modules have P14 I/O.
Each channel has 64 byte transmit and receive FIFOs. The FIFO
trigger thresholds, and the baud rates are individually
programmable: up to 921.6 kbps for RS232 channels, and 5.5296 Mbps for
RS422/485 channels. All channels generate interrupts on PCI interrupt INTA.
For fast interrupt source detection the UART provides a special global
interrupt source register. All channels use transceivers with 15 KV ESD
protection.
A wide range of drivers is available: Linux, LynxOS, OS-9, pSOS+, QNX,
VxWorks and Windows. All drivers - except the Windows drivers - are
supplied as C source code. The modules are also
available as TPMC465/466 with
convection cooling.
|
|
|
Product Specification
|
|
PMC module without front panel, 32-bit/33MHz
PCI interface, IEEE P1386.1 compliant, PCI 2.3 compliant, 3.3/5V Vio
|
|
|
Conduction-cooling, stiffener bars supported
|
|
|
TPMC375: 8 RS232/422/485 ports
TPMC376: 4 RS232/422/485 ports
|
|
|
RS232 signals: TxD, RxD, RTS, and CTS |
|
|
RS422 signals: TxD+/- and RxD+/-,
programmable termination |
|
|
RS485 signals: 4-wire TxD+/- and RxD+/-, or
2-wire Dx+/-, programmable termination |
|
|
I/O lines in high impedance state
after power-up |
|
|
P14 I/O |
|
|
Exar XR17D154 or XR17D158 controller |
|
|
64 byte receive and 64 byte transmit FIFOs per
channel
|
|
|
Transfer rates up to 5,5296 Mbit/s via RS-422/485 and 921.6 Kbit/s via EIA-232
|
|
|
15 KV ESD protection
|
|
|
-40°C .. +85°C operating temperature range
|
|
|
Linux, LynxOS, OS-9, pSOS+, QNX, VxWorks, and
Windows drivers available
|
|
|
5 years warranty
|
|
|
|
|
Ordering Information
|
|
|
|
|
TPMC375-10
|
8 port serial RS232/422/485 interface PMC module, conduction cooled
|
|
|
TPMC376-10
|
4 port serial RS232/422/485 interface PMC module, conduction cooled
|
|
|
|
|
TPIM001-10 |
PIM I/O module with HD-50 Connector |
|
|
|
|
TDRV002-SW-12
|
OS-9 driver
|
|
|
TDRV002-SW-32
|
pSOS, pSOS+ driver
|
|
 |
TDRV002-SW-42
|
VxWorks driver
|
|
|
TDRV002-SW-62
|
Windows NT 4.0 driver
|
|
|
TDRV002-SW-65
|
Windows 2000/XP driver
|
|
|
TDRV002-SW-72
|
LynxOS driver
|
|
|
TDRV002-SW-82
|
LINUX driver
|
|
|
TDRV002-SW-92
|
QNX 4 driver
|
|
|
TDRV002-SW-95
|
QNX 6 driver
|
|
|
|
|
TPMC375-DOC
|
TTPMC375 Conduction Cooled 8 Channel Programmable
Serial Interface
User
Manual |
|
|
TPMC376-DOC
|
TPMC376 Conduction Cooled 4 Channel Programmable
Serial Interface
User
Manual |
|
|
TPMC375-ED
|
Engineering documentation
|
|
|
TPMC376-ED
|
Engineering documentation
|
|
|
|
