TPMC385  Conduction-Cooled Quad Gigabit Ethernet PMC Module

TPMC385 Conduction-Cooled Quad GbE PMC Module

TPMC385 Block Diagram

Conduction-Cooled 4 Channel 10/100/1000BASE-T Ethernet Interface
The TEWS TPMC385 is a PCI Mezzanine Card (PMC) module providing a quad channel Gigabit Ethernet 10BASE-T/100BASE-TX/1000BASE-T interface.

A transparent 64bit/133 MHz PCI-X-to-PCI Bridge provides access to the four Intel 82574IT Ethernet Controllers, which support 10, 100, and 1000 Mbit/s transmission rates for full duplex operation. 10 and 100 Mbits/s transmissions for half duplex operation are supported. Each channel of the TPMC385 is capable of performing an auto negotiation algorithm which allows both link-partners to find out the best link-parameters by themselves.

The TPMC385-10 routes all four Ethernet ports to the rear I/O P14 connector. The module comes without front panel. The PIM module TPIM006-10 provides RJ45 jacks for rear IO.

Product Specification
	PMC module, 64-bit/133 MHz PCI-X/PCI interface, IEEE P1386.1 compliant, PCI 3.0 and PCI-X 2.0a compliant, 3.3/5V Vio, conduction-cooled, no front panel
	Four 10/100/1000BaseTX Ethernet ports, Intel 82574IT controller
	Auto-negotiation for data rate and full/half duplex mode
	Rear I/O via P14
	All ports galvanically isolated
	Receive and transmit FIFOs configurable in 1 KB increments
	32 KB EEPROM
	Conduction-cooled, -40°C .. +85°C operating temperature range
	5 years warranty

	Ordering Information
	TPMC385-10	Quad 10/100BaseT Ethernet interface with P14 I/O, conduction-cooled
	TPIM006-10R	PIM I/O module with four RJ45 jacks for TPMC382-10
	TPMC385-DOC	TPMC385 Conduction-cooled Quad 10/100MBit Ethernet Interface PMC User Manual
	TPMC385-ED	Engineering Documentation

powerBridge Computer Vertriebs GmbH

Ehlbeek 15a • 30938 Burgwedel • Germany
Tel: +49-5139-9980-0 • Fax: +49-5139-9980-49

Copyright 2011 by powerBridge Computer • Questions or comments to: info@powerbridge.de