|
TPMC465 8 Channel Serial RS232/422/485 Controller
TPMC466 4 Channel Serial RS232/422/485 Controller
TPMC467 4 Channel Serial RS232/422/485 Controller
TPMC465 Block Diagram
TPMC466 Block Diagram
TPMC467 Block Diagram
TPIM001-10 PIM I/O Module with HD50 Connector
TA301-10 Connection Kit: 1.8m Cable with HD-50
Connectors and 50 Pin Terminal Block
|
|
Programmable Serial Interfaces
with High-Impedance-State after Power-up
The TPMC465 and TPMC466 are single-width 32 bit PMC modules and offer 4 or 8 channel high performance
serial controllers with individually programmable RS232, RS422, and
RS485 interfaces. The four ports on the TPMC467 are available with RJ-45
connector. The modules have an operating temperature range of
-40°C to +85°C.
RS232 channels support RxD, TxD, RTS, and CTS,
and RS422 channels support RxD+/- and TxD+/-. RS485 channels can
operate in 4-wire full duplex or 2-wire half duplex mode. The modules
have front I/O via a HD50 connector and P14 I/O or
on the TPMC467 via four RJ45 connectors.
Each channel has 64 byte transmit and receive FIFOs. The FIFO
trigger thresholds, and the baud rates are individually
programmable: up to 921.6 kbps for RS232 channels, and 5.5296 Mbps for
RS422/485 channels. All channels generate interrupts on PCI interrupt INTA.
For fast interrupt source detection the UART provides a special global
interrupt source register. All channels use transceivers with 15 KV ESD
protection.
A wide range of drivers is available: Linux, LynxOS, OS-9, pSOS+, QNX,
VxWorks and Windows. All drivers - except the Windows drivers - are
supplied as C source code. The modules are also available with conduction
cooling as TPMC375/376, and as
TCP465/466
modules in 3U
CompactPCI form factor.
|
|
|
Product Specification
|
|
PMC module, 32-bit/33MHz
PCI interface, IEEE P1386.1 compliant, PCI 2.3 compliant, 3.3/5V Vio
|
|
|
TPMC465: 8 RS232/422/485 ports
TPMC466: 4 RS232/422/485 ports
TPMC467: 4 RS232/422/485 ports
|
|
|
RS232 signals: TxD, RxD, RTS, and CTS |
|
|
RS422 signals: TxD+/- and RxD+/-,
programmable termination |
|
|
RS485 signals: 4-wire TxD+/- and RxD+/-, or
2-wire Dx+/-, programmable termination |
|
|
I/O lines in high impedance state
after power-up |
|
|
TPMC465/466: Front I/O via HD50 connector and P14 I/O
TPMC467: Front I/O via four RJ-45 ports |
|
|
Exar XR17D154 or XR17D158 controller |
|
|
64 byte receive and 64 byte transmit FIFOs per
channel
|
|
|
Transfer rates up to 5,5296 Mbit/s via RS-422/485 and 921.6 Kbit/s via EIA-232
|
|
|
15 KV ESD protection
|
|
|
-40°C .. +85°C operating temperature range
|
|
|
Linux, LynxOS, OS-9, pSOS+, QNX, VxWorks, and
Windows drivers available
|
|
|
5 years warranty
|
|
|
|
|
Ordering Information
|
|
|
|
|
TPMC465-10R
|
8 port serial RS232/422/485 interface PMC module
|
|
|
TPMC466-10R
|
4 port serial RS232/422/485 interface PMC module
|
|
|
TPMC467-10R
|
4 port serial RS232/422/485 interface PMC module,
RJ-45 via front panel
|
|
TPMC467-11R
|
4 port serial RS232/422/485 interface PMC module,
RJ-45 via front panel, Motorola compatible pinout on RJ45
|
|
|
|
|
TA301-10 |
Connection kit 1.8m cable with HD-50 connectors and 50 pin terminal
block |
|
|
TPIM001-10 |
PIM I/O module with HD-50 Connector |
|
|
|
|
TDRV002-SW-12
|
OS-9 driver
|
|
|
TDRV002-SW-32
|
pSOS, pSOS+ driver
|
|
 |
TDRV002-SW-42
|
VxWorks driver
|
|
|
TDRV002-SW-62
|
Windows NT 4.0 driver
|
|
|
TDRV002-SW-65
|
Windows 2000/XP driver
|
|
|
TDRV002-SW-72
|
LynxOS driver
|
|
|
TDRV002-SW-82
|
LINUX driver
|
|
|
TDRV002-SW-92
|
QNX 4 driver
|
|
|
TDRV002-SW-95
|
QNX 6 driver
|
|
|
|
|
TPMC465-DOC
|
TPMC465 8 Channel RS232/RS422/ RS485
Programmable Serial Interface
User
Manual |
|
|
TPMC466-DOC
|
TPMC466 4 Channel RS232/RS422/ RS485
Programmable Serial Interface
User
Manual |
|
|
TPMC467-DOC
|
TPMC466 4 Channel RS232/RS422/ RS485
Programmable Serial Interface
User
Manual |
|
|
TPMC465-ED
|
Engineering documentation
|
|
|
TPMC466-ED
|
Engineering documentation
|
|
|
TPMC467-ED
|
Engineering documentation
|
|
|
|
