RapiDex™ Service: Technology Innovation Drives Faster, More Competitive Board Customization

Emerson Network Power's RapiDex program now enables cost-effective embedded solutions by tailoring the motherboard design to match your requirements. Emerson’s unique design and manufacturing technology delivers quick turns with minimal set-up fees. The volume commitment is only 100 pieces, with boards delivered within eight weeks of the order. Emerson’s rapid customization capability removes the need to use a less optimized standard product, leading to improved cost, space and power profiles. … cont.

XMC Module provide 4 Gigabit Ethernet Interfaces

25 October, 2011  TEWS Technologies TXMC885 is a quad channel Gigabit Ethernet XMC module with RJ45 front panel I/O. All ports support full/half duplex mode and are insulated. The module is available in -40°C .. +85°C operating temperature range. TEWS Technologies products come with a 5 year warranty. ... cont.

Ready-to-Use MicroTCA.4 Starter Kits for Industrial Applications

20 September, 2011  Our MicroTCA.4 Starter Kits are ready-to-use 6- or 12-slot system platforms based on Intel’s latest Core i7 technology. Rear I/O slots serve the needs for I/O intensive applications. These systems allow entering the MicroTCA world in a fast and simple way for industrial applications. ... cont.

AdvancedMC FPGA Module offers MTCA.4 Rear I/O

15 September, 2011  TEWS Technologies TAMC651 AMC module provides a Spartan-VI FPGA and allows to connect MTCA.4 Rear I/O cards. 46 differential FPGA I/O lines (LVDS), 2 differential reference clock lines (LVDS), 2 Spartan-6 GTP transceivers I/O signals are available. The differential FPGA I/O lines could also be used as single-ended I/O lines. In addition 128 MB, 16 bit wide DDR3 SDRAM bank and a SFP front panel interface are available. ... cont.

Serial conduction-cooled RS-232/422/485 Controller providing Independently Insulated Channels

10 May, 2011  TEWS Technologies TPMC377 conduction-cooled PMC module is a serial controller with 4 RS-232/422/485 interfaces. Each of the four channels is insulated from the system and against each other. All channels use transceivers with 15 KV ESD protection. The FIFO trigger levels are programmable and the baud rate is individually programmable up to 921.6 kbps for RS232 channels and 5.5296 Mbps for RS422/485 channels. The module offer P14 I/O.. ... cont.

High-end PowerQUICC III MP8569 Processor AMC

2 May, 2011  NAT NAMC-8569-CPU is a PowerPC AdvancedMC module providing up to 1 GB RAM, 512 KB MRAM, 2 GB NAND flash and up to 128 MB NOR flash. Serial Rapid IO, Gigabit Ethernet and PCI Express are available on the backplane. The Lattice FPGA allows different I-TDM modes, TDM-to-I-TDM and TDM cross-connect. The module has an opt. H.110-like 32 MHz TDM interface. It is available in mid-size and full-size form factor. ... cont.

Use your PMC Modules on the PCIe Bus

27 April, 2011  The TEWS Technologies TPCE260 is a PCI Express board providing a PMC module socket and allows the use of PMC modules in PCIe based systems - e.g. for data acquisition and storage systems as well as for testing and laboratory applications. The board operates in the extended temperature range from -40°C .. +85°C. TEWS Technologies products come with a 5 year warranty. ... cont.

Adlinks Smart Panels makes your HMI real

21 April, 2011  The ADLINK SP-860-Series is a 8" Touch screen smart panel with 600 MHz TI Sitara AM3517 Cortex A8 processor, 256 MB DDR2 RAM and up to 4 GB flash. The sunlight-readable 4:3 display is made for industrial use and provides a CANbus interface, WIFI, Bluetooth, MicroSD slot, Gigabit Ethernet, RS-232/422/485, USB 2.0, audio, and TV-out. ... cont.

Solid State Disc's for Industrial Applications

21 March, 2011  The ADLINK SSD-Series is made for industrial use and provides high throughput data transfers, extended temperature range, and a long life cycle. The SSD's are available in 1,8" and 2,5" form factor with up to 256GB. The sustained read and write data rates are up to 470/385 MB/s. ... cont.

NAT-MCH with PCIe and SRIO Gen2 has been awarded as the Best Hardware Product

12 November, 2010  The NAT-MCH has been awarded at the ATCA Summit in the category Best Hardware Product. The distinctive feature of the new NAT-MCH is the double bandwidth of PCIe and SRIO based MicroTCA systems because it supports the second generation of PCIe and SRIO switch devices. ... cont.

... cont.