|
ATCA-7350 AdvancedTCA CPU Board with up to 32 GB RAM
ATCA-7350 Block Diagram
|
|
Ultra High-Performance ATCA CPU Board with
10GbE Backplane
Emerson Network Power's ATCA-7350 AdvancedTCA Blade-CPU offers two quad
core Intel Xeon low
voltage processor in a symmetric multiprocessing (SMP) configuration.
The both processor have a clock rate up to 2.13 GHz and they are
connected to the Intel E5000P chip set with 1066 MHz FSB. 1 MB boot
flash and 32 GB two channel DDR II ECC RAM are
available. The board supports Gigabit Ethernet over PICMG 3.0 and 10GbE
over PICMG
3.1. RAID 0/1 is possible via two 2.5" SAS or SSD HDD's. SAS has a high
fail-safe and offers fast and secure connections. That's why it is
qualified for blade server systems. SSD's are robust, have fast access
time and a very low power consumption.
The front panel has two USB, and one RJ-45 port. An
intelligent platform management (IPM) controller monitors all local and
blade specific environmental information.
The ATCA-7350 supports Linux Red Hat RHEL 5.2 and Wind River PNE 2.0.
More interfaces like an USB management port, two GbE and one monitor interface are available over an opt. transition module (RTM). In addition the RTM-ATCA-7350-2GE offers
two GbE and two Fibre channel interfaces.
The product is availably up to end of July 2011. If
you have questions please contact us.
|
|
|
Product Specification
|
|
AdvancedTCA CPU board, single-slot, PICMG 3.0
and PICMG 3.1 compliant, hot swap support
|
|
|
Two Quad Core Intel low voltage
Xeon CPUs with 2.13 GHz clock, 1066 MHz FSB, 12 MB L2-Cache
|
|
|
Intel® E5000P chip set with SMP support,
Intel® 6321ESB, Intel® 82571, BCM 5715C Controller
|
|
|
Up to 32 GB dual channel DDRII 667 MHz RAM
|
|
|
Two 2.5" SATA/SAS/SSD HDD's
|
|
|
RAID 0/1
|
|
|
Two 2 Gb/s Fibre channel ports via RTM
|
|
|
1 MB boot flash
|
|
|
NEBS and ETSI compliant
|
|
|
IPMI management
|
|
|
Power supply -48VDC (39.5..-72VDC, < 200W)
|
|
|
-5°C .. 55°C operating temperature range
|
|
|
2 years warranty
|
|
|
|
|
Ordering Information
|
 |
|
|
ATCA-7350-0GB
|
ATCA-7350 AdvancedTCA Processor Blade
|
|
|
|
ATCA-7X50-MEM-2G
|
2 GB RAM module for the ATCA-7X50
|
|
|
ATCA-7X50-MEM-4G
|
4 GB RAM module for the ATCA-7X50
|
|
|
ATCA-7X50-MEM-8G
|
8 GB RAM module for the ATCA-7X50
|
|
|
ATCA7X50-HDD1-SAS
|
72 GB SAS HDD for the ATCA-7X50
|
|
|
ATCA7X50-HDD2-SAS
|
146 GB SAS HDD for the ATCA-7X50
|
|
|
ATCA-7X50-HDD3-SATA
|
80 GB SATA HDD for the ATCA-7X50
|
|
|
ATCA-7X50-SSD2-SATA
|
32 GB SATA SSD for the ATCA-7X50
|
|
|
RTM-ATCA-7350
|
RTM for the ATCA-7350
|
|
|
RTM-ATCA-7350-GE
|
RTM for the ATCA-7350 with 2 GbE interfaces
|
|
|
RTM-ATCA-7350-2GE
|
RTM for the ATCA-7350 with 4 GbE interfaces
|
|
|
RTM-ATCA-7350-FC
|
RTM for the ATCA-7350 with 2 Fibre channel interfaces
|
|
|
|
ATCA-7350-DOC |
ATCA-7350 Reference Guide |
|
|
