NAT-PM-AC600  600W Power Module with low Ripple and Noise and high Efficiency

 

 



NAT-PM-AC600 Power Module with N+1 and 2+2 Redundancy

 



NAT-PM-AC600 Block Diagram

 



NAT-PM-AC600D Power Module with N+1 and 2+2 Redundancy

Hot-swappable Power Module for MicroTCA Systems
NAT's NAT-PM-AC600 is a 600W AC power module providing management and low ripple and noise. The power module is designed for MicroTCA compliant crates and systems. It provides functionality for powering, managing, and protecting a MicroTCA system that includes up to 12 AdvancedMCs, 2 MCHs, and 2 Cooling Units.

 

Product Specification

600W MicroTCA Power Module

MicroTCA Power Module, PICMG MicroTCA.0 compliant, full size or double full size form factor, 6 HP

110-265 VAC (auto-range) input with self-locking power cord

Enhanced Module Management Controller (EMMC)

Hot-swap N+1 and 2+2 redundancy

Backup power for other PMs (Shared Management Power, SMP)

Load sharing

Programmable current limiting threshold per output channel

16 channels of 12 V @ 50 A; 16 channels of 3.3 V @ 3 A

Protection against short circuit, over temperature, over voltage, and under voltage

Hardware Platform Management firmware upgrade support

Max. 35mV ripple and noise (12V)

Max. 20mV ripple and noise (3.3V)

Max. load per channel at 12VDC: 600W/50A

Max. load per channel at 3.3VDC: 9.9W/3A

Efficiency: 92%

Operating temperature range -5 .. +55C, opt. -40C .. +85C

2 years warranty

 

 

Ordering Information

NAT-PM-AC600

600W Power Module, full size

NAT-PM-AC600D

600W Power Module, double full size

 

NAT-PM-ACCAB-EUR

1,8m  power cord with safety lock mechanism

NAT-PM-AC600-UM

NAT-PM-AC600 User Manual