TR E5x/msd

TR E5x/msd 3U VPX CPU Board with Intel Xeon E3 Processor, up to 16 GB RAM and XMC Site

3U VPX CPU board with a Quad Core Intel Xeon E3-1505 processor. The board is based on Intel's CM236 express controller. Up to 16 GB DDR4-1600 ECC SDRAM are soldered on the board.

The CONCURRENT Technologies TR E5x/msd offers one VITA 42.0 and VITA 42.3 XMC site, up to two DisplayPorts with audio and video support, up to four SATA 6Gbit/s ports, up to three Gigabit Ethernet ports, up to 5 RS-232 ports, up to 5 USB ports, 6 GPIO ports, and one PCIe x8 or two PCIe x4 or four PCIe x2 ports. Opt. one onboard flash module can be mounted. The front panel offers up to three RS-232, one Gigabit Ethernet, one USB 3.0 and one DisplayPort and front I/O from the XMC module.

The board supports Microsoft Windows, Linux, and VxWorks. In addition the Fabric Interconnect Networking software (FIN-S) will be supported.

The TR E5x/msd is available in standard operating temperature range, extended temperature and in conduction-cooled.


Technical Description

  • 3U/4HP VPX CPU board, VITA 42.0, VITA 42.3, VITA 46.0, VITA 46.4, VITA 46.6, VITA 46.9, VITA 46.11, VITA 65, VITA 47.0, VITA 48.0, VITA 48.2, and OpenVPX compliant
  • MOD3-PAY-2F2U-16.2.3-3,
    MOD3-PAY-1F2F2U-16.2.2-4 Module Profile
  • Quad core Intel Xeon E3-1505M v5 CPU, 45W,
    Quad core Intel Xeon E3-1505L v5 CPU, 25W
  • Intel CM236 express controller
  • Up to 16 GB ECC DDR4-1600 RAM, soldered
  • 8 MB BIOS flash
  • Opt. one XMC site, VITA 42.0, VITA 42.3, front- and P2 rear-I/O (VITA 46.9)
    Option 1: full rear XMC I/O (P2w1-X24s+X8d+X12d)
    Option 2: reduced rear XMC I/O (P2w7-X8d+X12d) providing P2 I/O with 1 USB 2.0 and 1 USB 3.0, 1 SATA 6Gbit/s and one DisplayPort
  • 2 independent graphics interfaces, front panel DisplayPort and via P2 (XMC option 2) with audio and video support, DirectX 12, OpenGL 5.x and OpenCL 2.1 support
  • Up to four SATA 6Gbit/s ports, two ports via P1, opt. one port via P2 (XMC option 2) and one port for an opt. flash module
  • Opt. onboard flash module
  • Up to three Gigabit Ethernet ports, two SerDes 1000Base-BX or Gigabit Ethernet ports VITA 46.6 via P1 and opt. one Gigabit Ethernet front panel port (occupy XMC slot), with or without magnetic, Intel i210
  • Up to 5 RS-232 ports, one RS-232/422/485 (Tx, Rx, RTS and CTS only on RS-232) port via P1, one RS-232 (Tx, Rx, RTS and CTS) port via P2 and one RS-232 (full-modem) or 3 RS-232 front panel (Tx/Rx) ports
  • Up to 5 USB ports, 1 USB 3.0 front panel port, opt. 2 USB 2.0 ports via P1, 1 USB 2.0 port via P2 and 1 USB 3.0 port via P2 (XMC option 2)
  • 6 GPIO ports, 2 ports via P1 and 4 ports via P2
  • Opt. one GbE, one USB 3.0, up to three RS-232 and one front panel DisplayPort and XMC front-I/O
  • One PCIe x8 or two PCIe x4 or four PCIe x2 Gen 3 ports via P1
  • PCIe switch supports two non-transparent ports for multi processing configurations
  • Fabric Interconncect Networking Software (FIN-S)
  • P0, P1 and P2 support OpenVPX configuration
  • 4 channel DMA engine for fast data block moves
  • UEFI 2.4 BIOS, LAN Boot Firmware
  • Real Time clock and watchdog timer
  • Opt. Trusted Platform Module (TPM)
  • Audio via front panel DisplayPort and DisplayPort via P2
  • In 3 environmental classes available: standard (0°C .. 55°C), extended (-25°C .. +70°C) and conduction-cooled (-40°C .. +85°C)
  • 2 years warranty

Order Information


3U/4HP CPU board, Quad Core Xeon E3-1505M, 8 GB RAM, 0 .. 55°C


3U/4HP CPU board, Quad Core Xeon E3-1505L, 16 GB RAM, 0 .. 55°C


VITA 46.0 front panel


VITA 65 front panel


Rear I/O configuration

Technical Documentation

TR E5x/msd Data Sheet